Cantilever gantry walking track positioner welding robot

Cantilever gantry walking track positioner welding robot

Parameters of welding robot for cantilever gantry walking track positioner:

1. Two positioners, with a load of 350 kg on top, equipped with quick clamping.

2. Positioner tooling, the length is 2580mm*2200mm.

3. Configure a robot ground rail with an effective travel of 2 meters, and install a cantilever gantry upside down welding robot on it.

4. The height of the cantilever gantry is 3.8 meters.

5. The effective length of the cantilever gantry is 1.8 meters.

6. The bottom of the cantilever gantry can be rotated by a 360-degree servo drive.

7. A 300 kg welding robot with a 2 m arm length is hung upside down on the cantilever gantry