longitudinal seam welding equipment application: technical solutions for longitudinal seam argon arc welding machine
The customer’s steel strip workpiece is 700mm~1250mm. Two such steel strips and steel strips are butt welded by argon arc, that is, the length of the weld is 700mm-1250mm, and the material is divided into carbon steel with a thickness ranging from 0.4mm to 2.0mm. Between.
Now Wuxi Youcai Robot Co., Ltd. provides the following solutions according to customer requirements:
Scheme design effect drawing (subject to the actual product):
The welding effect can achieve single-sided welding and double-sided forming. The gantry type longitudinal seam argon arc splicing welding machine is designed, developed and produced by Wuxi Youcai Robot Co., Ltd., with a gantry structure, and the welding process is reliable and efficient. The whole control process adopts touch screen and plc control, stepping motor, straight seam tooling (including mandrel, piano keys), ball platform, Panasonic argon arc welding machine, cooling water tank, and cooling welding gun.
Gantry type longitudinal seam argon arc splicing welding machine operation process: two sets of steel belts are fed into theon both sides of the through the ball platforms on both sides, and then the key mechanism switch is activated, the welding start button is activated, and the welding starts At the same time, the equipment has a scale to adjust the starting point of the welding torch according to the width of the steel strip. After the welding is completed, manually unload the workpiece, load it again, and repeat the work.
The performance characteristics of the gantry longitudinal seam argon arc welding machine:
● Adopt the key type clamping method, the heat dissipation effect is good during welding, the deformation of the workpiece is small, and the welding quality is high;
● Suitable forwelding process method;
● Weldable carbon steel material;
● Welding form; longitudinal seam panel;
Technical parameters of gantry longitudinal seam argon arc welding machine:
Maximum welding length (unit: mm): 1500
Weldable sheet thickness (unit: mm): 1mm~2.0mm
Welding moving speed (unit: mm/min): 100-600
Maximum moving speed of welding gun (unit: mm/min): 2000
The key lift stroke: not less than 100mm.
The PLC control box is perpendicular to the operating side of the welding direction, and the current is directly adjusted on the welding machine.