Auto brake disc stamping robot production line
Automobile brake disc stamping production line
The first step: employees use forklifts or cranes to neatly discharge the sheets on the loading material, the loading machine automatically divides the material, after grease, and second positioning, the 4-axis robot takes the product out and sends it directly to the mold of the hydraulic press , Then the robot returns to the safe point, punching press, the
second step: After the punching is completed, the 4-axis robot 2 takes out the blank and sends it to the mold of the hydraulic press 2.
The third step: After the hydraulic press 2 is started and the stamping is completed, the 6-axis robot 1 will turn the blank and put it on the intermediate station.
Step 4: The 4-axis robot 3 takes the product out and puts it into the punch 1. After the robot returns to the safe point, the punch presses.
Step 5: After the stamping is completed, the last robot takes out the finished product and puts it into the receiving frame.
One production process ends, and the next cycle is carried out to realize automated production.
The equipment of this line includes: 4 4-axis 15 kg robots, 1 6-axis 20 kg robot, and 1 dual-station grease feeding machine.